21 st kubelwagen

[blitzhazed]

how do you take the kubel apart can only see 5 screws underneath backend stuck help

[normandy]

If you remove the screw in front of the front wheels and the two in front of the rear wheels the body will lift off. The last two of the five screws hold each of the front seats in place. That's about it, hope this helps.

[blitzhazed]

did that front end is loose but the back end see ms to be stuck on something dont wont to break anything

[blitzhazed]

at last got it apart had to use knife blade paint holding it together

[normandy]

Good news! I thought it might be glue. What are your plans for your Kubelwagen?
I've often looked at the kubel and thought it sits to high. If you take off the wheels and drill new holes for the axle say an 1/8'' - 1/4'' above the existing holes it may give it a more believable appearance. Sounds like another project......

[blitzhazed]

thats an idea to look at but for now the back seat as it looks too wide no room for the feets got seat out with knifeblade